Factory set single switch; specify increasing or decreasing pressure or temperature and set point 6, 12, 21K, 40, 54, 55, 100, 117, 120, 400, 800 Series (single switch versions only)

For the 12, 100, 117, and 120 series

Approved for Division 2, Zone 2 hazardous and corrosive atmospheres, and with optional Zone 0 intrinsic safety compliance, the 117 Series can be used to measure vacuum, pressure, differential pressure, or temperature in a variety of applications.

H117 - One SPDT output; epoxy coated enclosure; internal adjustment with “High-Low” reference scale.

Buna N diaphragm and O-ring with epoxy coated aluminum 1/2” NPT (female) pressure connection; large 0.72” orifice for clean-out purposes

Approved for Division 2, Zone 2 hazardous and corrosive atmospheres, and with optional Zone 0 intrinsic safety compliance, the 117 Series can be used to measure vacuum, pressure, differential pressure, or temperature in a variety of applications.

H117 - One SPDT output; epoxy coated enclosure; internal adjustment with “High-Low” reference scale.

Welded 316L stainless steel diaphragm and 1/2” NPT (female) pressure connection, large 0.72” orifice for clean-out purposes

Approved for Division 2, Zone 2 hazardous and corrosive atmospheres, and with optional Zone 0 intrinsic safety compliance, the 117 Series can be used to measure vacuum, pressure, differential pressure, or temperature in a variety of applications.

H117 - One SPDT output; epoxy coated enclosure; internal adjustment with “High-Low” reference scale.

1.5” flush mount, welded 316L stainless steel diaphragm and pressure connection.

Approved for Division 2, Zone 2 hazardous and corrosive atmospheres, and with optional Zone 0 intrinsic safety compliance, the 117 Series can be used to measure vacuum, pressure, differential pressure, or temperature in a variety of applications.

H117 - One SPDT output; epoxy coated enclosure; internal adjustment with “High-Low” reference scale.

Welded 316L stainless steel diaphragm and 1/2” NPT (female) pressure connection, large 0.72” orifice for clean-out purposes; NACE MR-0175 compliant

Approved for Division 2, Zone 2 hazardous and corrosive atmospheres, and with optional Zone 0 intrinsic safety compliance, the 117 Series can be used to measure vacuum, pressure, differential pressure, or temperature in a variety of applications.

H117 - One SPDT output; epoxy coated enclosure; internal adjustment with “High-Low” reference scale.

316L stainless steel diaphragm (optional HastelloyR C or MonelR); VitonR GLT O-ring (optional KalrezR, Ethylene Propylene, or AflasR); 316 stainless steel 1/2” NPT (female) pressure connection (optional HastelloyR C or MonelR), large 0.72” orifice for clean-out purposes. Models 188 and 189 have a 316L stainless steel 1/2” NPT (female) pressure connection; NACE MR 0175 compliant.

Approved for Division 2, Zone 2 hazardous and corrosive atmospheres, and with optional Zone 0 intrinsic safety compliance, the 117 Series can be used to measure vacuum, pressure, differential pressure, or temperature in a variety of applications.

H117 - One SPDT output; epoxy coated enclosure; internal adjustment with “High-Low” reference scale.

316L stainless steel diaphragm (optional HastelloyR C or MonelR); VitonR GLT O-ring (optional KalrezR, Ethylene Propylene, or AflasR); 316 stainless steel 1/2” NPT (female) pressure connection (optional HastelloyR C or MonelR), large 0.72” orifice for clean-out purposes. Models 188 and 189 have a 316L stainless steel 1/2” NPT (female) pressure connection; NACE MR 0175 compliant.

Approved for Division 2, Zone 2 hazardous and corrosive atmospheres, and with optional Zone 0 intrinsic safety compliance, the 117 Series can be used to measure vacuum, pressure, differential pressure, or temperature in a variety of applications.

H117 - One SPDT output; epoxy coated enclosure; internal adjustment with “High-Low” reference scale.

218 - Set Point Range: 30 “Hg Vac to 0 psi /Deadband: 2 to 5 “Hg /Over Range Pressure : 3 psi / Proof Pressure: 30psi

Approved for Division 2, Zone 2 hazardous and corrosive atmospheres, and with optional Zone 0 intrinsic safety compliance, the 117 Series can be used to measure vacuum, pressure, differential pressure, or temperature in a variety of applications.

H117 - One SPDT output; epoxy coated enclosure; internal adjustment with “High-Low” reference scale.

Welded 316L stainless steel bellows and 1/4” NPT (female) pressure connection

Approved for Division 2, Zone 2 hazardous and corrosive atmospheres, and with optional Zone 0 intrinsic safety compliance, the 117 Series can be used to measure vacuum, pressure, differential pressure, or temperature in a variety of applications.

H117 - One SPDT output; epoxy coated enclosure; internal adjustment with “High-Low” reference scale.

Welded 316 stainless steel diaphragm and 1/2” NPT (female) pressure connection, large 0.72” orifice for clean-out purposes; NACE MR0175 compliant (except model 194)

Approved for Division 2, Zone 2 hazardous and corrosive atmospheres, and with optional Zone 0 intrinsic safety compliance, the 117 Series can be used to measure vacuum, pressure, differential pressure, or temperature in a variety of applications.

H117 - One SPDT output; epoxy coated enclosure; internal adjustment with “High-Low” reference scale.

Welded 316 stainless steel diaphragm and 1/2” NPT (female) pressure connection, 0.06” orifice to dampen pulsations; NACE MR0175 compliant (except model 494)

Approved for Division 2, Zone 2 hazardous and corrosive atmospheres, and with optional Zone 0 intrinsic safety compliance, the 117 Series can be used to measure vacuum, pressure, differential pressure, or temperature in a variety of applications.

H117 - One SPDT output; epoxy coated enclosure; internal adjustment with “High-Low” reference scale.

Buna N diaphragm and O-ring with 316 stainless steel 1/4” NPT (female) pressure connection; option M540 VitonR diaphragm and O-ring available

Approved for Division 2, Zone 2 hazardous and corrosive atmospheres, and with optional Zone 0 intrinsic safety compliance, the 117 Series can be used to measure vacuum, pressure, differential pressure, or temperature in a variety of applications.

Type H117K - One SPDT output; epoxy coated enclosure; internal adjustment with “High-Low” reference scale

Buna N diaphragm and sealing diaphragms with epoxy coated aluminum 1/8” NPT (female) pressure connections.

Approved for Division 2, Zone 2 hazardous and corrosive atmospheres, and with optional Zone 0 intrinsic safety compliance, the 117 Series can be used to measure vacuum, pressure, differential pressure, or temperature in a variety of applications.

Type B117 - Immersion stem; One SPDT output; epoxy coated enclosure; internal adjustment with reference dial

Approved for Division 2, Zone 2 hazardous and corrosive atmospheres, and with optional Zone 0 intrinsic safety compliance, the 117 Series can be used to measure vacuum, pressure, differential pressure, or temperature in a variety of applications.

Type E117 - Bulb and capillary; One SPDT output; epoxy coated enclosure; internal adjustment with reference dial