Share

​ ​ ​ ​ ​


Doger Technology Development, S.A.
0
  1. Todos los productos
  2. UE Controls One Series Electronic Switch+Transmitter temperature

UE Controls One Series Electronic Switch+Transmitter temperature

https://www.doger.com/web/image/product.template/10666/image_1920?unique=f0b2770

The One Series provides explosion (flame)-proof, intrinsically safe and
non-incentive models that monitor gage pressure, differential pressureor ,temperature.

  • MODEL CODE
  • Temperature One series

Esta combinación no existe.

United Electric Controls
Interruptores de presion, interruptores de temperatura, Termocuplas, RTDs, transmisores de temperatura y presioón, detección de gases

An advanced low-power microcontroller provides four SMART model platforms –

1. a NAMUR NE 43 standard and HART®-enabled transmitter (1XTX00).

2. two discrete (digital input)-powered electronic switches (1XSW) that operate on the existing application’s 2 wires.

3. a transmitter-switch hybrid with two independent and programmable solid state relays (1XTXSW ).

4. and a 4-wire switch that provides high-power switching for local control of loads directly and at the point of measure. 

With no moving parts, these versatile instruments can be used in a wide variety of safety control, alarm and interlock applications (SCAI).

UE's One Series is your best choice for tough applications with high cycle rates, severe shock or high vibration. For plant upgrades, the

versatile powering options - analog loop, discrete input powered (VDC or VAC) and externally powered models offer options for soft or high capacity SPST alarm, trip or emergency shutdown.

Parameters available in the datasheet of the documents section

 


Specifications for UE Controls One Series Electronic Switch+Transmitter temperature

MODEL CODE 1XSWLL Discrete input powered 2-wire switch, 7.8-50 VDC @ 0.1A or 1XSWHL Discrete input powered 2-wire switch, 70-240 VAC/VDC @ 0.1A or 1XSWHH External powered 4-wire switch, 70-240 VAC/VDC @ 0.15-10A or 1XTXSW Loop powered HART transmitter, two programmable relays, 0-280 VAC/VDC @ 0.3 A or 1XTX00 Loop powered HART transmitter
Temperature One series L1 Local mount sensor, 4, 6 and 10" probe lengths or L2 Local mount sensor, 4, 6 and 10" probe lengths or L3 Local mount sensor, 4, 6 and 10" probe lengths or R1 Remote mount sensor, 2.5" probe length, 6' MI extension wire or RC Remote mount sensor, 2.5" probe length, up to 60' MI/Coax extension wire (+$6/ft) or H1 Remote mount sensor, 2.5" probe length, 6' MI extension wire or HC Remote mount sensor, 2.5" probe length, up to 60' MI/Coax extension wire (+$6/ft) or C1 Remote mount sensor, 2.5" probe length, 6' MI extension wire or CC Remote mount sensor, 2.5" probe length, up to 60' MI/Coax extension wire (+$2/ft) or TC Local spring-loaded NUN sensor for thermowells
UEONLINE-bulletin_one-series_1x Datasheet.pdf
Download
  •  Transmitter-only, switch-only and hybrid transmitter-switch models offer maximum flexibility
  •  Digital process display provides process conditions at a glance
  •  Programmable set point and deadband provides the most versatile, accurate and repeatable alarm and shutdown switching
  •  Configurable IAW® self-diagnostics provide piece of mind that the instrument is functioning properly by communicating with the control system using a dedicated discrete output
  •  Plugged Port Detection annunciates a clogged sensor and a closed bypass valve
  •  Max/Min memory – samples and stores the highest and lowest extreme process values for process diagnostics and learning
  •  Nuisance trip filtering eliminates unwanted nuisance trips and unnecessary alarms
  •  Programmable trip delay – hold off the trip decision for tenths of seconds up to several minutes
  • Trip counter – records trips for up to two relays for process diagnostics and learning
  •  3-year warranty


Product Image
UE Controls One Series Electronic Switch+Transmitter temperature